Resumen de contenidos para LEGRAND adorne ADTP703H
Página 2
Single Pole • C onnect the wire identified as Common/Hot in Step 1 to HOT. REMARQUE : Dans une installation à trois • Connect the wire identified as Common/Hot in Step 1 to HOT. • Connect other wire to 1-POLE. •...
Página 4
CONTROLS • Releasing button within 5 seconds activates automated Min Level Trim TAP INPUT: 3 PUSHBUTTONS On/Off pushbutton feature as described in Initial Turn-on section below. • M omentary push with Load Off turns Load On to LDL (last dim level). • Continuing to hold button for approximately 5 more seconds causes the +/• Momentary push with Load On turns Load Off. LEDs to flash, and initiates manual calibration: •...