Cisco Linksys WRT54GR Manual De Instrucciones página 7

3
Configuring Wireless Security
The Router supports seven types of wireless security: WEP , WPA Personal, WPA
Enterprise, Radius, PSK2, PSK2-Mixed, PSK2+Radius. These security
features are not enabled by default, but you should configure wireless security to
prevent security breaches in your wireless network.
Follow the steps below to configure WEP , WPA Personal, PSK2, and
PSK2-Mixed. For instructions on configuring other security features
see the on-screen User Guide included on the Setup Wizard CD.
A
Open the Router's Web Utility as shown in Step 2, and select the Wireless
tab's Wireless Security screen.
You see the Wireless Security screen:
B
Select one of the following wireless security features from the Security
Mode pull-down menu:
• WEP: A basic encryption method that is not as secure as WPA. To use
WEP , select a Default Transmit Key (choose which key to use), and the
level of encryption, 64 bits 10 hex digits or 128 bits 26 hex digits. Then
enter a WEP key using the Passphrase generator or enter a WEP key
manually.
7