Mounting The Unit - Datamars Patriot PMX50 Guia Del Usuario

Mounting the unit

The unit can be mounted directly onto a suitable vertical support or wall material using
the two 3" (75 mm) nails and two washers provided. Thread washers onto the nails.
Space the nails 3" (75 mm) apart (or one nail length). Hammer in the nails, allowing
them to protrude by 3/8" (10 mm). Slide the unit onto the nails with the washers
inside the mounting slot.
Note:
If the unit is being mounted on a wall made of concrete, brick, plasterboard or
similar, use screws instead of nails. Wall anchors or plugs may also be required.
Operation
1 Plug the unit into the mains/line power supply.
2 Turn on the mains/line power supply switch.
The pulse indicator light flashes each time the unit pulses.
66