GET BREWING
The KitchenAid
®
brewing with easy, safe operation and no open flame. With the simple flip of a switch, automatically
brew exceptionally clean and bright tasting coffee with no need for guesswork or adjustment.
For more information on how to get the most out of your Siphon Coffee Brewer, refer to your
1.
Place the coffee filter into the bottom
of the brew unit. Turn the coffee filter
handle clockwise until it locks into place.
3.
Fill the carafe with fresh, filtered water to
the desired cup level as indicated on the
sides of the carafe. To avoid spills on the
countertop, do not overfill the carafe. Place
the carafe on the base. Remove the brew
unit from the brew unit stand and place it
on the carafe. Turn the brew unit handle
until it aligns with the carafe handle and
locks into place.
NOTE:
The amount of coffee brewed
may be slightly less than the amount of
water you put into the carafe, due to
natural evaporation during the brewing
process. This is normal.
KCM0812
QUICK START GUIDE
Siphon Coffee Brewer brings together the incredible flavors of siphon coffee
"Instructions" manual or visit www.kitchenaid.com.
2.
Scoop the desired amount of ground coffee
into the brew unit using the coffee scoop;
then, place the lid on the brew unit.
NOTE:
For 8 cups of coffee, use
approximately 74g of medium ground
coffee.
4.
Press down on the ON/OFF switch
to begin the brewing cycle. The LED
indicator will glow and the water will
begin to heat.
Once the brewed coffee has stopped
pouring into the carafe, remove the
brew unit from the carafe and place
in the brew unit stand. Remove the lid
from the brew unit, place it on the carafe,
and turn clockwise to lock it into place.
Your coffee is now ready to be served.
NOTE:
The switch will automatically
turn off during the brewing cycle. Do
not remove the brew unit at this time;
the cycle is not yet complete. Allow the
coffee to finish pouring into the carafe.
®/™ © 2015 KitchenAid. All rights reserved. Used under license in Canada.
