Troubleshooting; Ec Declaration Of Conformity - Stanley SXVC20PE Manual De Instrucciones

Ocultar thumbs Ver también para SXVC20PE:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41

10 TROUBLESHOOTING

Problems
The appliance does not switch on
The appliance does not suck in
material, or sucks only weakly
Power tool does not start (where power
tool socket is featured)
Dust comes out of appliance
Bad smells from appliance when in
operation
(*) If the motor stops and does not restart during operation contact the Authorised Service Centre.
We, Annovi Reverberi S.p.A, of Bomporto (Modena), Italy, declare that the following Stanley appliance(s):
Designation of appliance: Wet&dry vacuum cleaner
Model No.:
Rated power:
is (are) compliant with the following European directives:
2006/95/EC – Directive to be replaced by 2014/35/EU from April 20, 2016,
2004/108/EC – Directive to be replaced by 2014/30/EU from April 20, 2016, 2011/65/EU, 2005/32/EC, 2012/19/EU.
and was (were) produced in compliance with the following norms or standardised documents:
EN 60335-1; EN 60335-2-2; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 62233; EN 50581; Reg.1275/2008.
Name and address of the person responsible for issuing the technical file: Stefano Reverberi / AR Managing Director
Via ML King, 3 - 41122 Modena, Italy
Date: 10.02.2016
MODENA (I)
Stefano Reverberi
EN
© 2016 English
Probable causes
No electrical power
Problems with the electric-electronic circuit
Accessories fouled
Filters dirty
Bags full
Tank full
Power tool plug not fitted into vacuum cleaner socket correctly
Switch off or turned to I
Filter not fitted
Filter damaged
Hose or connections damaged
Filters dirty

EC Declaration of conformity

SXVC20PE
SXVC20PTE
1.2 kW
1.2 kW
Check that the plug is firmly in the socket and that the mains
voltage supply is present (*)
Contact the Service Centre
Check and clean the nozzles, extensions or hoses
Clean the filters
Empty / change bags
Empty the tank
Fit the plug properly
Turn switch to power tool/II position
Fit the filter
Replace the worn filter with a new one
Replace damaged parts
Replace filters
SXVC20XTE
SXVC30XTDE SXVC35PTDE
1.4 kW
1.6 kW
Managing Director
13
(Original instructions)
Remedies
SXVC50XTDE
1.6 kW
1.6 kW
Tabla de contenido
loading

Este manual también es adecuado para:

Sxvc20pteSxvc20xteSxvc30xtdeSxvc35ptdeSxvc50xtde

Tabla de contenido