Post Installation Inspection; References; Standards Index - Briggs & Stratton 1768-0 Manual De Instalación Y Arranque

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

5.
Connect an accurate frequency meter to the load side
of the main circuit breaker (on the back of the control
panel).
6.
Ensure that the 15 Amp fuse is installed.
7.
Set the generator's main circuit breaker ON.
8.
Set the AUTO/OFF/MANUAL switch to MANUAL.
When the engine starts, allow it to warm up for two
minutes.
9.
When the engine speed has stabilized, slowly rotate
the adjustment screw clockwise and/or
counterclockwise until the maximum (peak) frequency
is reached. Normal operating frequency is 62.0 to
62.5 Hz. Reinstall the access hole plug.
10. Set the AUTO/OFF/MANUAL switch to OFF.
11. After the engine has halted, reinstall the air intake
guard.
12. Reinstall the control panel wiring cover to the air
intake guard.
13. Reinstall the battery/air intake access panel.
14. Set the AUTO/OFF/MANUAL switch to AUTO.
POST INSTALLATION
INSPECTION
Before placing the Home Generator System into service,
inspect the entire installation carefully. Ensure that any
scratches or broken paint on the inside or outside of the
enclosure are touched up with the supplied paint.
Complete the "Installation Checklist" as you make the
inspection. Ensure all items have been filled-in and all
signatures have been obtained. Instruct the owner to mail
the white copy to:
Briggs & Stratton Power Products
Warranty Registration
P. O. Box 1144
Milwaukee,WI 53201-1144
Briggs & Stratton Power Products Home Generator System
Installation Manual

REFERENCES

Standards Index

In the absence of pertinent standards, codes, regulations, or
laws, the published information listed below may prove
useful when installing this equipment.
• NFPA No. 54, National Fuel Gas Code, available from
the National Fire Protection Association, 1 Batterymarch
Park, Quincy, MA 02269-9101; (617) 770-3000; Fax
(617) 770-0700; online at www.nfpa.org..
• NFPA No. 30, Flammable and Combustible Liquids
Code, obtainable from NFPA, above.
• NFPA No. 37, Stationary Combustion Engines and Gas
Turbines, obtainable from NFPA, above.
• NFPA No. 58, American National Standard for Storage
and Handling of Liquefied Petroleum Gas, obtainable from
NFPA, above.
• NFPA No. 70, NFPA Handbook of National Electric
Code, obtainable from NFPA, above.
• NFPA No. 76A, Essential Electrical Systems for Health
Care Facilities, obtainable from NFPA, above.
• Article X, National Building Code, available from the
American Insurance Association, 1130 Connecticut Ave,
NW, Suite 1000,Washington, DC 20036; (202) 828-7100;
Fax (202) 293-1219; online at www.aiadc.org.
• Agricultural Wiring Handbook, obtainable from the
Food and Energy Council , 909 University Avenue,
Columbia, MO 65201; (573) 875-7155; online at
www.nfec.org/electricalwiring.htm.
• ASAE EP-3634, Installation and Maintenance of Farm
Backup Electrical Systems, available from the American
Society of Agricultural Engineers, 2950 Niles Road,
St. Joseph, MI, 49085-9659; (616) 429-0300; Fax
(616) 429-0385; online at www.asae.org.
19
Tabla de contenido
loading

Tabla de contenido