Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
T-EP REMOTE CONTROL
(OPTIONAL ACCESSORY)
Connecting the remote control T-EP
Take the remote display controller (OPTIONAL ACCESSORY)
and connect it electrically as described below.
2
Use a 3x0.5 mm
cable.
The maximum cable length between the unit and the dis-
play controller must not exceed 20 metres.
ATTENTION!: you are recommended to use a cable gland
of PG7 type or fairled to keep the mechanical seal of the
input cable.
a) connect the cable to connector "T-EP (terminals no. 7-6-5)"
of the power board via the cable gland;
b) fix the cable in the cable gland;
c) connect the cable to terminals 1-2-3 on the controller,
following the sequence of numbers.
84
M7
4
3
7
KP2
KP3
6
5
M8
T1
T3
M9
MAIN BOARD
T-EP CONTROL
TERMINAL
TERMINAL
T-EP
7
6
5
CONTROL T-EP
3
2
1
Main Board
7
6
5
3
2
1
Tabla de contenido
