Configuration - Energy SHP-130 Instrucciones Para La Instalación, El Uso Y El Mantenimiento

• ANTIFREEZE FUNCTION "

CONFIGURATION

The power board enables you to select two types
of operation that can be activated from the T-EP
remote control:
• "nonE" function - Without preheating (default)
• "HEAt" function - With preheating
From the main menu, access the "SEt" menu and
use the TOUCH PAD to display the "FrSt" menu.
Press the "Enter" key to confirm.
Use the TOUCH PAD to choose either the nonE
or HEAt function.
Confirm the selected function with the "Enter" key.
PLEASE NOTE: By default the HEAt function con-
trols the modulating ducted electric resistance
supplied as an accessory.
In order to control an anti-freeze system with
hydronic preheating coil, the setting FrSt-->
HEAt must be associated with the specific menu
configuration "DGTO" which sets a digital output
signal, contact "3-4" of the power board (see POW-
ER BOARD diagram).
ENTER
NO*= normally open contact
NC*= normally closed contact
FrSt FrSt
"
ENTER
ENTER
• DRY CONTACT "
CONFIGURATION
IMPORTANT!:
The function is available by
connecting the dry contact C1-C1 on the power
board.
The Dry input contact (NO
types of operation that can be activated from the
T-EP remote control:
• Remote On/Off "trnF" function (default)
Unit Off when the contact is closed
• Booster "bSt" function - Booster function
Active when the contact is closed.
From the main menu, access the "SEt" menu and
use the TOUCH PAD to display the "C1C1" menu.
Press the "Enter" key to confirm.
Use the TOUCH PAD to choose either the trnF
or bSt function.
Confirm the selected function with the "Enter" key.
ENTER
English
C1-C1 C1-C1
"
*
) C1-C1 enables two
ENTER
ENTER
95