Led Ethernet; Internet Test Led - VIERLING VIT-A2 Manual De Instrucciones

4.7

LED Ethernet

The green "Ethernet" LED indicates the presence of an active Ethernet
connection. This LED lights up as soon as a PC or notebook is properly
connected to the LAN jack using a network cable with a 1:1 configuration.
4.8 Internet test
The "Internet test" LED shows the status and result of an Internet
connection test that you can control with the "Internet connection" button.
The test is intended to determine whether an Internet connection can be
successfully established via the DSL connection.
:
N
OTE
Prior to performing an Internet connection test, you
must use the "VIT-A2 Watch" Windows software once to
provide
device's Router mode. Please read the corresponding
section in the documentation for "VIT-A2 Watch".
Prior to performing an Internet connection test, you must ensure that the
ADSL link is synchronized. This is the case if the "ADSL/ADSL2+" LED is
continuously lit up (see section 4.5).
The Internet connection test is in the initial state or in standby if the
"Internet test" LED is off. Press the button for about three seconds to
initiate the Internet connection test. As soon as the test begins, the
VIT-A2 - 70299.207 - 1.3 – 20070802
LED
proper Internet connection data for the
VIERLING
35