Adjusting The Slicing Thickness; Installing The Reversible Shredding Disc - KitchenAid KFP1355 Instrucciones

ASSEMBLING THE FOOD PROCESSOR

Adjusting the slicing thickness

Thinner_
Set the desired thickness by moving the lever
to the left for thinner slices and to the right
for thicker slices.
Installing the r_ever_sible shr_edding disc
Drop the drive adapter over the
1
power shaft.
TIP: You may need to adjust the drive
adapter with a slight turn on the power
shaft until it drops into place.
Drop the assembled disc onto the drive
3
adapter and push until it clicks firmly
into place.
NOTE: The lever only works with
the externally adjustable slicing disc.
Changing thickness settings with other
discs or blades installed will have no
Thicker_
effect on operation.
2
4
Hold the reversible shredding disc by
the finger holes with the desired side
(medium or fine) facing up; then push
the disc adapter into the bottom of
the disc.
Install the work bowl cover, being sure
it locks into place.
13