Motor Assembly - Hunter Industrial XP Manual De Instrucciones

INS TA L LATI O N
A
Insert retention link into fork and
align holes.
Insert clevis pin into retention rod
and secure with provided clip to
connect Retention Cable to the
motor.
NOTICE
NEVER LIFT BY MOTOR CABLE
A
B
C
3

MOTOR ASSEMBLY

CRUSH HAZARD. To prevent serious injury or death, ALWAYS attach
the Retention Cable to the fan motor and secure to the building
structure on EVERY fan.
B
To connect the VFD cable to the
fan motor, join the two connectors
and twist, making sure they lock
together
C
Raise motor, using a lift, up to
downrod while pushing cables into
downrod.
Feed the press studs through
downrod flange and secure with
nylon lock nuts. (Pull excess wire
and cable through top of downrod.)
NOTE
Be sure not to pinch the motor
cable when raising the motor
into place.
NOTE
Leave approximatlely
3" of slack in the
wire and the cable,
at the top of the
downrod opening.
14