I Ns Tal Lati On; Retention System - Hunter Industrial XP Manual De Instrucciones

I NS TA L LAT IO N
A
Secure first clamp on the loose
end of the cable.
Live End
When attaching cable clamps, remember: "Never saddle a dead horse."
Place the u-bolt on the "dead" end of the Retention Cable and the saddle on the "live" portion of the Retention
Cable. If done incorrectly, the U-bolt could crush the wire when tightened and can reduce the strength of the wire.
13
2
CRUSH HAZARD. To prevent serious injury or death, ALWAYS attach
the Retention Cable to the fan motor and secure to the building
structure on EVERY fan.
A
Wrap retention cable
around building structure
that can withstand
double the installed fan
weight.
Secure the second clamp to the
cable approximately 6" from the
first clamp.
Dead End

RETENTION SYSTEM

B
Secure remaining cable
to itself with cable
clamps.
B
NOTE
Leave approximatlely 3"
of slack in the wire and
the cable, at the top of the
downrod opening.
Secure the remaining clamp
in the center of the 2 installed
clamps.