Maxon ME2 Manual Del Usuario página 3

4. Unbolt and remove cover from
main frame as shown in FIG. 3-1.
NOTE: Place a rag under the tee to ab-
sorb hydraulic oil, and a bucket
at the end of the hydraulic hose
to catch the remaining hydraulic
fl uid from the cylinder.
5. Disconnect 2 hydraulic hoses (FIG. 3-2)
from the tee. Then disconnect tee from
pump (FIG. 3-2).
©
MAXON Lift Corp. 2021
LIFT CORPORATION Sht. 3 of 12 DSG#
COVER
M-21-11
HEX NUT AND
FLAT WASHERS
(3 PLACES)
UNBOLTING & REMOVING COVER
HYDRAULIC HOSE
DISCONNECTING HYDRAULIC HOSES
Rev. - Date: 06/25/21
MAIN FRAME
FIG. 3-1
TEE
PUMP AND MOTOR
FIG. 3-2