Remove all rings, watches and jewelry before doing any electrical work.
To prevent accidental personal injury and equipment damage, disconnect (-)
battery cable from battery.
1. Unfold the platform (FIG. 2-1). Refer to ME2
Operation Manual for instructions.
2. Turn power on and activate Liftgate.
Then, use the control switch to lower (DN)
platform until all pressure in hydraulic sys-
tem is released (FIG. 2-1).
3. Disconnect negative (-) battery cable
from vehicle battery.
©
MAXON Lift Corp. 2021
LIFT CORPORATION Sht. 2 of 12 DSG#
!
WARNING
!
WARNING
LOWERING PLATFORM TO RELEASE
HYDRAULIC PRESSURE
M-21-11
Rev. - Date: 06/25/21
FIG. 2-1