Power Linking - Chauvet DJ Intimidator Spot Duo Guía De Referencia Rápida

Intimidator™ Spot Duo QRG
AC Power

Power Linking

Fuse
Replacement
Mounting
Mounting
Diagram
Control Panel
Description
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
You can link up to 9 Intimidator™ Spot Duo products at 120 VAC and 17 units
at 230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace
with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the
When using only one mounting clamp with this fixture, you must use a
clamp with a captive bolt to prevent accidental loosening.
Button Function
<MENU> Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Safety
Tripod Insertion
Rubber Feet
4
Notes.
Hanging Bracket
EN