Models And Product Description; Description; Typical Installation - Comunello Automation FORT 400 Manual Del Usuario

2 MODELS AND PRODUCT DESCRIPTION

2.1 DESCRIPTION

FORT is an electromechanical actuator for residential and industrial sliding gates with integrated control unit, allowing gate movements to be
controlled using a button, radio control and, if necessary, manually using the supplied key. Available in versions FORT 400 - 500 - 600 - 800 - 1000
- 1500 for gates up to 400 Kg - 500 Kg - 600 Kg - 800 Kg - 1000 Kg - 1500 Kg respectively.
Table 1 lists all the FORT models in production.
NOTE: This manual illustrates the FORT FT800 - 230V model paired with the control unit CU - 230V - HP; in any case, both the images and
text apply to all FORT models.
A description of the electronic control units specific to each model is provided in a separate manual.

2.2 TYPICAL INSTALLATION

FIG. 1
D
Voltage risk;
24V
Description
Main power supply
Signal light
TX photocell
RX photocell
Key-operated switch
Antenna
230V
Description
Main power supply
Signal light
TX photocell
RX photocell
Key-operated switch
Antenna
22 COMUNELLO ®Copyright 2020 - All rights reserved
B
C
E
Crushing risk;
Cable
HAR EN50575 CPR
305/2011
RG58
Cable
HAR EN50575 CPR
305/2011
RG58
A
F
Foot crushing risk; Hand crushing risk;
Length (1 m / 20 m)
2
3 x 1.5 mm
2
2 x 0.5 mm
2 x 0.5 mm 2
2
4 x 0.5 mm
3 x 0.5 mm 2
max 20 m
Length (1 m / 20 m)
2
4 x 1.5 mm
2
2 x 0.5 mm
2 x 0.5 mm 2
2
4 x 0.5 mm
3 x 0.5 mm 2
max 20 m
Gearmotor with internal
A
control unit
B
Signal light
C
Photocell
D
Key-operated switch
Bracket for
electromechanical
E
or black magnetic
opening limit switch
Bracket for
electromechanical or
F
red magnetic closing
limit switch
No transit during
manoeuvre.
Length (20 m / 50 m)
2
3 x 2.5 mm
2
2 x 1.0 mm
2 x 1.0 mm 2
2
4 x 1.0 mm
3 x 1.0 mm 2
max 20 m
Length (20 m / 50 m)
2
4 x 2.5 mm
2
2 x 1.0 mm
2 x 1.0 mm 2
2
4 x 1.0 mm
3 x 1.0 mm 2
max 20 m