Olympia PMR 1420 Manual De Instrucciones página 21

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
3.
Press the + / - buttons to select between "ON" or "OF" to
activate/deactivate this function.
4.
Press the
button to confirm your selection and return to the main
screen display.
Comments:
Activating the Repel Mosquito function:
When in Standby mode, the walkie-talkie automatically switches back to
RMON mode if there is no input for 3 seconds. RMON flashes in the display
and the repel mosquito signal is audible.
The repel mosquito signal remains audible even when selecting menu
settings.
The signal stops during a channel scan. When the scan has finished, the
signal becomes audible again.
The acoustic repel mosquito signal stops during a transmission or receive
signal. When the transmission or receive signal has finished, the signal
becomes audible again.
When VOX is activated, a tone is transmitted to repel mosquitos.
J.
Lighting & Flashing Lamp
1. Activating/Deactivating the lighting
1.
Press the – button until the volume level is at its minimum setting of "01"
and continue to hold it for 1 second until the lighting is activated.
2.
Repeat the process to switch the lighting off .
2. Activating/Deactivating the flashing lamp
1.
Press the + button until the volume level is at its maximum setting of "07"
and continue to hold it for 1 second until the flashing lamp is activated.
2.
Repeat the process to switch the flashing lamp off.
Comments:
- Flashing mode can also be used as an SOS lamp: short flashes (3 times)
long flashes (3 times)
- The user cannot switch the equipment off as long as flashing lamp mode is
switched on.
3. Quick switching between lighting and flashing lamp
After having activated lighting or flashing mode, you can press the +/- buttons
to switch between lighting and flashing mode.
- When lighting mode is active, press the + button to set volume level "07" and
keep the button pressed for 1 second to switch to flashing mode.
- When flashing mode is active, press the - button to set volume level "01" and
keep the button pressed for 1 second to switch the lighting mode.
short flashes (3 times).
Tabla de contenido

Solución de problemas

loading

Tabla de contenido