Olympia PMR 1420 Manual De Instrucciones página 19

4. Scanning stops at each channel on which a signal is received. Now press
the PTT button to participate in the call or press the
automatic channel scan function.
D. Activating/Deactivating the Auto PTT function
When the automatic PTT function is activated, users can communicate with
each other without having to press and hold the PTT button.
D1. Activating the Auto PTT function
1. Press the MENU button.
2. Press the + / - buttons until PA appears in the display and then press the
button to confirm the selection. The PA status currently set, "ON" or "OF",
flashes.
3. Press the + / - buttons to select ON and activate the function.
4. Press the button to confirm your selection and return to the main
screen display.
D2. Auto PTT function ("PA ON" is selected)
1. Press the PTT button and start talking.
2. After pressing the button longer than 5 seconds, the unit's back-lighting is
switched on and "TX" flashes in the display. Release the PTT button to
continue the call automatically.
3. Press the PTT button again to end the call and terminate the Auto PTT
function.
Comments: Auto PTT function is on
If you do not press the PTT button within 3 minutes, the unit deactivates the
Auto PTT function automatically and returns to Standby mode.
The VOX function is not available when the Auto PTT function is on.
D3. Ending the Auto PTT function
1. Press the MENU button.
2. Press the + / - buttons until PA appears in the display. Then press the
button to confirm. The PA status currently set, "ON" or "OF", flashes.
3. Press the + / - buttons to select OF and deactivate this function.
4. Press the button to confirm your selection and return to the main
screen display.
E. Activating/Deactivating the Monitor function
This function is used to receive all the signals from a channel during poor
transmission.
1. Press the MENU button.
2. Press the + / - buttons until Mon appears in the display. Then press the
button to activate the Monitor function.
button to end the