Troubleshooting Guide - Craftsman CMESTE920 Manual De Instrucciones

For assistance with your product, visit our website at www.craftsman.com, or call the Craftsman help line at 888-331-4569.
Problem
Trimmer will not start.
Cutting line is consumed quickly in edge mode.

TROUBLESHOOTING GUIDE

BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
Possible Cause
Cord is not plugged in.
Circuit fuse is blown.
Circuit breaker is tripped
Cord or switch is damaged.
Edging too far from edge of sidewalks or
abrasive surfaces.
The cutting line is hitting the sidewalk or
abrasive surfaces.
Possible solution
Plug tool into a working outlet.
Replace circuit fuse. (If the product repeatedly
causes the circuit fuse to blow, discontinue use
immediately and call the Craftsman help line at
888-331-4569.
Reset circuit breaker. (If the product repeatedly
causes the circuit breaker trip, discontinue use
immediately and call the Craftsman help line at
888-331-4569.
Call the Craftsman help line at 888-331-4569 or
have cord or switch replaced.
Ensure edging wheel is on the edge of the surface
and the cutting line is positioned in the grass
or dirt area to be edged, not the sidewalk or
abrasive surface.
English
11