Specifications - HHB FlashMic DRM85 Manual Del Usuario

Specifications

Sampling Frequency 48kHz, 44.kHz and 3kHz. Selection by FlashMic Manager or on DRM85.
Bit Resolution (Linear) 6 Bit
Audio Formats
Linear PCM or MPEG  Layer . Selection by FlashMic Manager software or on DRM85.
6 mode settings.
Bit rates (MPEG) 9, 60, 8 kbps
Electronics Frequency
0 Hz - 0 kHz ± dB @ 48 kHz FS Linear PCM
Response
THD + N < 0.% (0 Hz - 0 kHz) @ 48 kHz FS Linear PCM
Number of Channels  (Mono)
Microphone Capsule
Omni-directional
Record Level
Automatic or Manual Gain Control
High Pass Filter Switchable on/off,  dB/octave @ 00Hz
Data Storage System Fixed internal memory, capacity  GB.
Date / Time Internal real-time clock, running as long as power supply is available. Back-up supply for 
minute to allow battery change. Set/synchronized by host computer application according to
host computer clock. Manual setting on DRM85 by menu item.
File Format
Linear PCM: .wav, Broadcast Wave File (.wav). Or compressed MPEG  Layer  .wav
Date / Time stamp is stored in file header. Filename generated automatically by DRM85,
basic text string provided from PC software.
File System FAT. Mounts as a removable drive via USB mass storage device protocol. File transfer is
possible with the FlashMic Manager software or through Windows Explorer and Mac OS
Finder.
Headphone Output 3.5mm stereo socket, mono signal to both channels. Manual volume control by rotary switch.
Output may be used for analog audio recording. Drive capability for 3 ohm headphone, short
circuit protection.
Included accessories
Stand Clamp, Batteries (x), USB cable, Pouch, CDROM, Manual.
Optional Accessories
Windshield (DRMWS), table stand (DRMTS).
Weight 366 grams / 3 ounces (excluding batteries).
Dimensions Length 44mm / 9.6 inches. Diameter at widest point (mic capsule) 50mm,  inches.
En.38