Switching The Flashmic On - HHB FlashMic DRM85 Manual Del Usuario

Switching The FlashMic On

The FlashMic is switched on by a SHORT PRESS on the jogswitch, and switched off by a
LONG PRESS until the text
jogswitch is released.
Note that it is not possible to turn the FlashMic off while it is connected to a computer via
its USB cable.
On switching the FlashMic on, the LCD panel displays in sequence:
Note that the factory default microphone name is DRM_85 and the factory default preset
is PSET_.
After this sequence, the FlashMic is in its standby state – referred to in this manual as IDLE
mode - and the displays are as shown below.
In IDLE mode – i.e. when the FlashMic is powered but not otherwise being operated – the
main display alternates between the number of the last recording (
within the FlashMic are referred to as 'tracks') and the remaining recording time.
An exception to this is when no recordings have been made since the FlashMic was last
reconfigured, when the message
The FlashMic is fitted with an internal calendar/clock. Before using the FlashMic for the
first time it is recommended that this is set correctly, as this information is included in the
audio file header as their time/date. See Clock Set Menu, page  for details of how to
do this.
appears in the display. The FlashMic will turn off when the
OFF
DRM85
ê
Firmware version
ê
Microphone name
ê
Active preset.
FlashMic IDLE Mode Displays
appears instead of
NOFILE
03: 1 4: 3 5
TRKnnn - recorded files
.
TRKnnn
En.9