Preset Menu - HHB FlashMic DRM85 Manual Del Usuario

Preset Menu

The Preset Menu allows the user to select which preset from the FlashMic's current
configuration file is to be used.
The FlashMic's configuration file can have up to 9 presets. The configuration file is loaded
into the FlashMic from a computer, using the supplied FlashMic Manager software. Each
preset determines the value of various FlashMic parameters, including recording level
and mode, pre-record buffer duration and the file name. (The file name will appear in the
header of the audio files.) The parameters are all defined within FlashMic Manager; see
Configuration Files and Presets, page 6 for a full description.
To enter the Preset Menu, enter MENU mode by pressing the M/STOP button, and then
make one SHORT DOWN TURN of the jogswitch. The display will show . Select this
PRESET
with a SHORT PRESS, and the name of the currently selected preset will be displayed. To
select a different preset, make SHORT UP or DOWN TURNs of the jogswitch. The display
will show the names of the alternative presets, as they were defined in FlashMic Manager.
When the name of the required preset is displayed, a SHORT PRESS on the jogswitch will
select it and load it into the FlashMic. The display will then show OK to confirm.
PRESET
Preset Menu Display
Note that not all 9 presets available in a configuration file need to be defined in FlashMic
Manager. Those not defined will be displayed as , where N is a number between 
PSET N
and 9, as is the default preset name used in FlashMic Manager. (However, note that
PSET N
PSET N will still be displayed for a preset that has been defined if the default name is not
altered!) If selection of an undefined preset is attempted, the message is displayed,
EMPTY
indicating that this preset location cannot be used.
PSET 1 EMPTY
Preset Empty
Preset Name
Note that when the FlashMic is first used "out of the box", all nine presets are empty.
En.7