Leer 1LG0300000 Manual Para Usuarios página 4

HARDWARE IDENTIFICATION CHART
13MM
STEEL BOLT
Quantity: 8
STAINLESS RUBBER
STEEL WASHER WASHER
Quantity: 14 Quantity: 2
TENT ORIENTATION ON YOUR VEHICLE
There are two mounting options for the orientation of your new LEER Tent. Either the tent will open so that the ladder extends off
the back of your vehicle, "Rear Mounted, " or the ladder extends off the side of your vehicle, "Side Mounted. " Most of our customers
choose to mount their tents with the ladder extending off the side of the vehicle, in "Side Mounted" orientation.
Rear mounted
Either orientation works for larger vehicles, however, most sedans or smaller
Benefits for the rear mounted orientation:
1. Fits into narrow camping spaces.
2. Trunk or tail gate area at the rear of your vehicle is accessible
from inside the annex.
4
10MM X 40MM 10MM X 20MM
BOLT STEEL BOLT
Quantity: 8 Quantity: 2
10MM
METRIC WRENCH METRIC WRENCH
Quantity: 2
SUVs are better suited for the side mounted option.
TOOLS
All of the tools you need to install your tent are
included. You may wish to use the following optional
tools during installation: box cutter, 13mm/10mm
ratchet wrench, hacksaw (for cutting mounting tracks).
10MM
NYLOCK NUT
Quantity: 8
13MM/15MM CHANNEL
SLIDER
Quantity: 1 Quantity: 8
Side mounted
Benefits for the side mounted orientation:
1. Allows for bicycle racks and other tow hitch/bar accessories
to be installed without interfering with your tent operation.
2. Closed tent width will fit inside the roof dimensions of most
vehicles, (i.e. the tent base will not extend beyond the roof
line of your vehicle when closed).
3. Typically does not require cutting of the mounting tracks.
13MM LADDER
NYLOCK NUT MOUNTING BRACKET
Quantity: 8 Quantity: 2
STEEL MOUNT MOUNTING
PLATE TRACKS
Quantity: 4 Quantity: 2