Matrix E30 Manual Del Usuario página 4

A Open HARDWARE FOR STEP 3.
3
B Attach the LINK ARM (9) to the HANDLEBAR
(8) using 1 BOLT (I). 1 NUT (J).
C Repeat steps on other side.
Hardware For Step 3
Description Qty
I Bolt 2
J Nut 2
6
MXR20_AG_E30_E50_r1_0_A.indd 6-7 MXR20_AG_E30_E50_r1_0_A.indd 6-7
A Open HARDWARE FOR STEP 4.
4
Hardware For Step 4
B Connect the CABLES (1) to the CONSOLE
(13) and carefully tuck the excess
cable into the CONSOLE MAST (2).
K
L
Attach the CONSOLE (13) to the
C
CONSOLE MAST (2) using 4 BOLTS (K).
Note: Be careful not to pinch any
D Attach PEDAL (14) to LINK ARM (9) using wires while attaching the console.
4 SCREWS (L). Repeat on other side.*
13
1
2
K
L 14
8
9
J
I
E30 SHOWN
5
ASSEMBLY COMPLETE!
Description Qty
Bolt 4
Screw 8
A To relocate elliptical, install TRANSPORT HANDLES as shown.
B Remove TRANSPORT HANDLES before using elliptical.
E50
*
15
L
14
Attach PEDAL (14) to
LINK ARM (9) using 4
SCREWS (L). Snap PEDAL
INSERT (15) into pedal.
Repeat on other side.
7
9/28/20 11:51 AM 9/28/20 11:51 AM