2.1 - ASSEMBLING THE BLENDER
Place the multi-function head (a3) in the horizontal position: press the button (a2)
and manually lower the multi-function head (a3) until it locks (the button (a2) returns
to its initial position).
Unlock the safety cover (a5) from the high-speed outlet (a4) by rotating it anti-
clockwise and then remove it. Fig. 6.
Make sure that the speed selector is in the "0" position.
Carefully place the blade seal (d5) on the blade (d6), fit this blade assembly in the
bottom of the jug (d4) (the jug must be upright) and tighten it by turning it one quarter
turn clockwise. Fig. 7a.
Handle the sharp blades with care to prevent injury. Fig. 7b.
Lock the blender jug (d) on the outlet (a4) by rotating it clockwise. Fig. 7c.
Place the food in the blender jug, and lock the lid (d2) fitted with the measuring cap
(d1), by rotating it anti-clockwise.
2.2 - USAGE
Start by turning the selector button (a1) to the desired position according to the recipe.
Use the "Pulse" position for better mixing control and for better blending of your preparation.
You can add food through the hole in the measuring cap (d1) during preparation.
To stop the appliance, turn the button (a1) to "0".
Tips :
You can prepare:
–
finely blended soups, cream soups, stewed fruit, milkshakes and cocktails.
–
liquid batter (pancake, fritters, Yorkshire pudding, waffles, clafoutis and custard flans).
–
If ingredients stick to the sides of the jug during processing, turn off the appliance,
remove the jug and scrape down the ingredients onto the blades using a spatula,
then replace the jug on the appliance so that you can carry on.
Never fill the blender jug with boiling liquid. Only use liquids or foods at simmering
temperatures or below.
Do not use the blender jug when it is empty or with hard and/or dry ingredients (like
ice cubes, sugar, hard spices, coffee beans, etc).
Always use the blender jug with its lid.
Never remove the lid before the blades have stopped completely.
Always pour liquid ingredients into the blender jug first before adding solid ingredients.
Maximum operating time: 2 min.
2.3 - DISMANTLING THE ACCESSORY
Wait for the appliance to come to a complete stop before removing the blender by
unlocking it in the anti-clockwise direction and put back the cover (a5) by locking it
on the outlet (a4) (clockwise). Fig. 5.2.
3 - FINELY CHOPPING SMALL QUANTITIES (DEPENDING
MODEL)
ACCESSORY USED :
–
Assembled grinder.
You can use the grinder to :
–
Chop in a few seconds by pulsing: dried figs, dried apricots, etc.
Quantity / max time: 100g / 5s
16