Before First Use; Assembling The Accessories - Krups PERFECT MIX 9000 Manual De Instrucciones

„ „
Before using for the first time, wash all accessory parts in warm water and washing
up liquid.
„ „
Place the appliance on a flat, clean and dry surface. Make sure that the selector
button (a1) is in "0" position and plug in your appliance.
„ „
You have several options for starting your appliance:
–
„
Intermittent operation (pulse): turn the selector button (a1) to the "pulse"
position. Using a succession of pulses can give you better control when preparing
certain foods.
–
„
Continuous operation: Turn the selector button (a1) to the desired position from
"1" to "max" depending on the food you are preparing.
You can change it as required during preparation.
„ „
To stop the appliance, turn the button (a1) to "0".
„ „
Important : The appliance will start only if the cover (a5) and the head (a3) are
locked. The appliance will stop immediately if you unlock the cover (a5) and/
or the head (a3) during operation. Lock the cover and/or the head, turn the
control button (a1) to the "0" position, and then start the appliance normally by
selecting the desired speed.
„ „
Your appliance comes with a microprocessor that controls and analyses the operating
power. If the load becomes too high, your appliance will stop automatically. To
restart your appliance, turn the selector button (a1) to the "0" position and remove
some of the ingredients. Allow your appliance to cool down for a few minutes. You
can then select the desired speed to complete your preparation.
The paragraph numbering corresponds to the numbers in the diagrams.
1 - MIXING / KNEADING / BEATING / EMULSIFYING /
WHISKING
„ „
You can prepare up to 1.2 kg of dough or mixture using the stainless steel bowl (b1)
and its lid (b2) depending on the food.
ACCESSORIES USED:
–
„
Stainless steel bowl (b1).
–
„
Lid (b2)
–
„
Kneader (c1) or mixer (c2) or balloon whisk (c3).

1.1 - ASSEMBLING THE ACCESSORIES

„ „
Press the button (a2) to release the multi-function head (a3) and raise it until it locks
in place. Fig. 1 and 2.
„ „
Fit the bowl lid and turn anti-clockwise to lock in place.
„ „
Insert the desired accessory (c1, c2 or c3) on the outlet (a6), push and rotate it anti-
clockwise a quarter turn to lock the accessory in its housing. Fig. 3.
„ „
Lock the stainless steel bowl (b1) by turning clockwise on the appliance and put in
the ingredients.
„ „
Place the stainless bowl (b1) on the appliance with the handles positioned as shown
14

BEFORE FIRST USE