Work Area Safety; Electrical Safety; Personal Safety - Ryobi RLT1830H13 Traducción De Las Instrucciones Originales

battery-operated (cordless) power tool.

WORK AREA SAFETY

■
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
■
Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
■
Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.

ELECTRICAL SAFETY

■
Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce risk
of electric shock.
■
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded
■
Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
■
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
■
When operating a power tool outdoors,
use an extension cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
■
If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.

PERSONAL SAFETY

■
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power tools
2 | English
may result in serious personal injury.
■
Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injury.
■
Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energising power tools that
have the switch on invites accidents.
■
Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in personal
injury.
■
Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power in unexpected
situations.
■
Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
■
If devices are
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
dust collection can reduce dust-related
hazards.
POWER TOOL USE AND CARE
■
Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it was
designed.
■
Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with switch is
dangerous and must be repaired.
■
Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing
or storing power tools. Such preventive
safety measures reduce the risk of starting
the power tool accidentally.
■
Store idle power tools out of the reach
provided for the
accessories,