Startup; Configure The Instrument - Hach TitraLab KF1000 Serie Manual Básico Del Usuario

Startup

Chemical exposure hazard. Obey laboratory safety procedures and wear all of the personal protective
equipment appropriate to the chemicals that are handled. Refer to the current safety data sheets
(MSDS/SDS) for safety protocols.
Personal injury hazard. Never use the instrument without the syringe cover installed.

Configure the instrument

1. From the main menu, select
2. Select an option, then push Select.
Option
Applications
Operators
Date + Time
Brightness
Sounds
Language
Network
Legacy settings
Info
Restore Defaults Sets the instrument to the default configuration.
Options
3. Push Back.
Change the application settings
The applications installed on the instrument have been pre-defined to optimize the measurement process.
Changing these default application parameters will have an effect on the measurement process and
measurement results. Only qualified personnel should change these parameters or use the instrument in expert
mode.
1. From the main menu, select
2. Select Applications followed by Edit.
3. Choose an application to change from the installed list and then push Edit.
Settings.
Description
Exports, changes (refer to
makes copies of application data. Make sure that the duplication function does not make
more than five applications.
Adds, changes and removes operators.
Sets the instrument date and time.
Sets the brightness of the display.
Sets the sound options.
Sets the language.
Give a name to the instrument. This name is used to connect the instrument to a PC.
Restart the instrument if the name is changed.
Specify the sensor data when the legacy adapter is used.
Shows information about the instrument and the attached hardware.
Sets the application parameters view to expert mode (refer to
settings on page 15). When the instrument is set to off, sets the syringe to empty into
the titrant bottle. Changes the temperature display unit. Prints the measurement curve if a
printer is connected.
Settings.
C A U T I O N
C A U T I O N
Change the application settings
N O T I C E
on page 15), removes and
Change the application
English 15