Steren COM-425 Guía Rápida De Instalación

HARDWARE INSTALLATION
You must install the PCI card inside of the computer. Make sure you have the enough
knowledge configuring and installing computer components, otherwise refers a
qualified personnel.
1.- Unplug the power cord from your computer and any other connected peripheral devices.
Follow the precautions for static electricity discharge.
2. Remove the computer's cover, select an available PCI slot for the new board.
3. Remove the selected slot bracket by unscrewing the holding screw, slide it out and place
the PCI card, carefully align the board's bus connector with the selected expansion slot on the
motherboard. Push the board down firmly, but gently, until it is well seated.
4. Place the computer's cover and plug all your peripheral devices.
Before start to use the TV tuner you must bridge the COM-425 and the audio card on
the computer. Just plug a 3,5mm from the Audio Output connector on the COM-425 to
Audio In connector on the audio card. In this way you can hear the TV programs and
Video files on your speakers.
Make sure to connect an antenna with RF connector.
Click ok Scan to search TV signals.
Make sure to check the Line-In option on Windows menu.
DRIVER INSTALLATION (XP)
1.- After installing the PCI card onto computer, a newly installed card will be found and Found
New Hardware Wizard appears. Press Cancel to close the wizard.
2.- Place the Driver CD into the CD-ROM drive.
3.- Select "imNetATV" then select "Device Driver"
If that does not run the Autorun, locate and run the Setup.exe file in the folder
"ImNetATVDriver"
4.- Choose the language for the installation and press NEXT to continue.
5.- InstallShield wizard begins. Click on Next to continue.
6.- On the next screen select "Complete" for a full installation. NEXT subsequently choose to
continue.
7.- Select a country to set the standard for TV tuner. Click on Set to continue. The installation
process begins.
8.- During installation will appear the next window, only choose "Continue"
9.- Click Finish to complete this part of the process. You must restart the
computer. Select "Yes, I want to restart my computer now" and press OK to restart.
10.- Once the computer restarted, click on Start >>> Control Panel >>> System >>> Hardware
>>> Device Manager >>> Sound, video and game devices, the new hardware should be
found.
SOFTWARE INSTALLATION
Before install the application CD, make sure you have installed DirectX 9 or higher in the
computer.
1.- Place the Driver CD into the CD-ROM drive.
2.- Locates Setup.exe file into AP software folder, and run it.
3.- Select language installation.
4.- Select the country where you want to use the equipment, then click on Set to continue.
5.- Choose destination location. If you want to use the default location, click on Next to
continue.
6.- It may appear the following message, simply select Yes to continue.
7.- During installation will appear the next window, only choose "Continue"
8.- On the following screens only accept messages to continue the installation.
9.- Then the next screen appears, press NEXT to continue.
10.- On the next screen select "Complete" for a full installation. NEXT subsequently choose to
continue.
11.- Choose destination location. If you want to use the default location, click on FINISH to
continue.
12.- Finally press OK and Finish to complete the installation. Then restart the computer
HOW TO USE THE SOFTWARE
Click Start >>> Programs >>> TV Champ >>> TV Champ to run the program.
Video Window
Click on one of the corners to resize the screen.
Click over the screen (using the right button of the mouse) to
choose one screen size (320x240, 640x480, 7210x480, 720x576 and full screen).
Channel input
Allows you to select a channel, directly. After enter a number, you must click Enter to confirm
the selection.
Video source select
Choose one of the available video sources: TV tuner, Composite video and S-Video.
Schedule capture
Program your recordings One Time, Several Days or Every Week.
Never lose a TV program again. Once you have edited the program, click ADD to insert it in
the program list, then click on Save.
Options
Record
Allows you to select the video recording format: AVI / MPEG1 / MPEG2.
Color
This option allows you to adjust: Brightness, Contrast, Hue, Saturation and Sharpness.
TV Tuner
Use this option to choose one of the video systems: PAL D/K, PAL I, PAL B/G, NTSC M. Use
NTSC M for Mexico.
TV type
Select the video source: Cable or Air TV.
Fine tune
Tune the TV signal, manually. Use this to enhance the signal. We
recommend to use Default option.
Input:
Video system:
Audio:
Analog video:
TV:
Video capture:
Capture format:
Snapshot format:
Resolution:
Dimensions:
Weight:
Product design and specifications are subject to change without previous notice
This Steren product is warranted under normal usage against defects in workmanship and
materials to the original purchaser for one year from the date of purchase.
1.- This warranty card with all the required information, invoice or purchase ticket, product box
or package, and product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as
warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries,
failure to follow enclosed instructions, improper repair by unauthorized personnel, improper
safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Brand
Serial number
Date of delivery
In case your product fails or have questions, please contact your nearest dealer. If you are in
Mexico, please give a call to our Call Center. 01 800 500 9000
SPECIFICATIONS
12V - - -
NTSC / PAL / SECAM
Stereo audio input / output
One S-video input
One composite video input
75ohms coaxial cable input
MPEG 1 / 2
AVI
BMP & JPG
720 x 576 at 25fps (PAL)
720 x 480 at 30fps (NTSC)
135 x 120 x 20mm
231g
Product: TV tuner video capture
Part number.: COM-425
Brand: Steren
WARRANTY
CONDITIONS
Part number
Address
Product