ECG ESP 20301 Manual Del Usuario página 11

1) Before first time use.
1. Put the lever with filter WITHOUT COFFEE in the machine under the symbol „INSERT" so that the tabs
on the metal cup fit in the sfunnel Secure everything by turning the lever counterclockwise in the „LOCK"
position.
2. Place a cup on the grid under the metal cup. Make sure the rotary knob is in the neutral position.
3. Connect the appliance to the power supply and switch it on with the ON / OFF switch. The red
operation indicator lights up. When the white light is on continuously, the machine is preheated. You can
start using it.
4. Turn the knob to the "coffee" position and let hot water flow out of the holder for approx. 30 seconds.
Note: The unit may be more noisy due to water being sucked into the system for about the first 20 seconds.
Note: Use the same procedure for preheating the coffee.
Cleaning the nozzle.
Warning: During the formation of hot water or steam, the lever with filter must be always placed in the
brew head.
Press the ON/OFF switch, the operation indicator (red) comes on and the machines preheats (the white
1.
indicator is on continuously).
2. Place a suitably deep water container under the nozzle to catch the steam. The nozzle should sufficiently
immersed in the container. Carefully, the steam is hot.
3. Turn the knob to the "steam" position and let the steam flow into the water container for about 1 minute.
Then turn the knob into neutral position.
The coffee maker machine is ready to be used.
2) NORMAL USE PROCEDURE.
Check, if there is water in the water tank before each use. Do not exceed the "MAX" line.
Preheat
To make a cup of good hot Espresso coffee, we recommend preheating the appliance, including the holder,
filter and cup, so that the taste of the coffee is not affected by the cold parts.
Put the lever with filter WITHOUT COFFEE in the machine under the symbol „INSERT" so that the tabs
1.
on the metal cup fit in the funnel. Secure everything by turning the lever counterclockwise in the „LOCK"
position.
2.
Place a cup on the grid under the metal cup. Make sure the rotary knob is in the neutral position.
11