Kohler K-T10585 Guia De Instalacion página 5

Plug Button
Setscrew
3. Install the Spout
IMPORTANT! Keep the spout supply tube clean above the finished
deck to avoid damage to the O-ring seal.
Loosen the spout setscrew until it is clear of the inside wall of the
spout.
Apply a ring of plumbers putty or other sealant around the
underside of the spout base according to the manufacturer's
instructions.
Position the spout on the sleeve, and carefully press down until
the spout contacts the finished deck.
Rotate the spout until it is aligned to face straight forward.
Tighten the setscrew.
Insert the plug button (if included) over the setscrew, flush with
the spout surface.
Remove any excess putty or sealant.
Kohler Co.
Spout
Assembly
Apply
Sleeve
plumbers
putty.
Finished
Deck
5 1036164-2-A