Making The Electrical Connections - HAMPTON BAY Scottsdale Manual Del Propietário

Making the Electrical
Connections
Remember to shut off the power.
Follow the steps below to connect the fan to
your ceiling wiring. Use the wire nuts
supplied with your fan. Secure the
connectors with electrical tape. Make sure
there are no loose strands or connections.
1. Connect the fan supply (black) wire and
light supply (blue) wire to the black ceiling
supply wire. (Figure 11)
2. Connect the neutral fan (white) wire t o
the w hite neutral wire from the ceiling.
(Figure 11)
3. Connect the fan ground wire (green) and
the mounting bracket ground wire (green) to
the ground wire from the ceiling. (Figure
11)
4. After connecting the wires, spread them
apart so that the green and white wires are
on one side of the outlet box and the black
and the blue wires are on the other side.
5
5. Turn the wire nuts upward and push the wiring into the
outlet box. Figures 12 and Figures 13 illustrate the wiring
connections for optional wall control (available at your
Hampton Bay Retailer, the wire color out of wall control
may vary, see wall control's installation manual for correct
wire connections)
NOTE
LIGHT KITS ARE AVAILABLE AT YOU HAMPTON
BAY RETAILER. THE FAN IS ALREADY WIRED TO
SUPPORT THE LIGHT KIT OPTION.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
OTHER PERSONAL INJURY. MOUNT FAN ONLY ON AN
OUTLET BOX OR SUPPORTING SYSTEM MARKED
ACCEPTABLE FOR FAN SUPPORT.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.
DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED
CONTROL DEVICE.
SUPPLY CIRCUIT
Ground
Conductor
Outlet Box
Green
Ground
Lead
Ground to
Downrod
WHITE
BLUE
BLACK WHITE
Diagram indicates optional light kit wiring.
Figure 11