Tabla de contenido
16.
Blade
17.
Head
18.
V groove
19.
Adaptor
20.
Adaptor lock button
21.
Removable shield
22.
Park rest
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1.
Dust bag
2.
Flat spanner
3.
Parallel guide + support
4.
Deep planing guide
5.
Adaptor (attached to planer)
6.
Screw + knobs
DUST EXTRACTION
Planer is equipped with dust extraction system, which prevents excessive deposition of dust in the
work place. When operating the planer for a long time on the surfaces that produce harmful dust,
the planer must be connected to external dust suction device.
INSTALLATION / DEINSTALLATION OF ADAPTOR
Depending on the needs, adaptor can be attached on left or right side of the planer (fig. A).
● Press the adaptor lock button (20) and pull the adaptor (19) out of the dust extraction outlet (5) (fig. B).
●
Slide the adaptor (
19) into the dust extraction outlet (5) (be careful to place protrusion in the notch),
make sure you can hear the adaptor lock button (20) snaps.
DUST BAG INSTALLATION
Equipment of the planer includes dust bag to maintain the processed surface clean.
● Place the dust bag hole on the adaptor (19) (fig. C).
●
Pull the dust bag gently to check if it is well fixed.
●
Deinstallation of the dust bag is similar to installation, only the sequence of actions is reversed.
Empty the dust bag on a regular basis, this will ensure efficient operation of the planer. Emptying the bag
when it is half-full is recommended.
PARALLEL GUIDE INSTALLATION
● Place the support (10) in the guide (on the left side) in the planer body and secure with support locking
knob (11) (included).
●
Use the supplied screw and locking wheel (
●
Set parallel guide to appropriate planing width.
Parallel guide bar should be pointed downwards.
- 1 pce
- 1 pce
- 1 set
- 1 pce
- 1 pce
- 1 set
PREPARATION FOR OPERATION
8) to attach parallel guide (9) to the support (10) (fig. D).
13
Tabla de contenido
