Controlling Airfiow Patterns; Maintenance; Blade Cleaning - Fanimation Caruso FP7000 Serie Manual Del Propietário

NOTE: Choose one of the following color code blade &
switch set-up combinations for the desired airflow direction
as shown.
INSTALLATION NOTE
This section is applicable after the fan and the blades are
completely installed.
1. Note the locations of the color code on the blade arm
and the reversing switch. (Figures 1a & 1b)
Figure 2:
Side A
Reversing Switch Setting - with Red Dot
Blade Arm Set - with Red Dot
Side B
Reversing Switch Setting - with White Dot
Blade Arm Set - with White Dot
Figure 3:
Side A
Reversing Switch Setting - with Red Dot
Blade Arm Set - with White Dot
Side B
Reversing Switch Setting - with White Dot
Blade Arm Set - with Red Dot
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the fi nish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to fi nish.
Periodic light dusting of the Palm Leaf and Woven Bamboo
blades is recommended. A feather duster will work best.
Controlling Airfl ow Patterns

Maintenance

Blade Cleaning

16
Color
Code
Location
Figure 1a
Side A
Side A
CAUTION
Do not use water when cleaning your ceiling fan. It
could damage the motors or the blades and create the
possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which can
warp and ruin the blades.
Reversing
Switch
Location
Figure 1b
Figure 2
Figure 3
Color
Code
Location
Side B
Side B