Product Disposal; Eu Declaration Of Conformity - ACM TRONIX Serie Instrucciones Y Advertencias Para El Instalador

This product is an integral part of the automation and therefore must be disposed together with the latter.
As in installation, also at the end of product lifetime, the disassembly and scrapping operations must be
performed by qualified personnel. This product comprises various types of materials: some may be recycled
others must be disposed of. Seek information on the recycling and disposal systems envisaged by the local
regulations in your area for this product category. Caution! – some parts of the product may contain pollu-
tant or hazardous substances which, if disposed of into the environment, may cause serious damage to the
environment or physical health. As indicated by the symbol alongside, disposal of this product in domestic waste is
strictly prohibited. Separate the waste into categories for disposal, according to the methods envisaged by current
legislation in your area, or return the product to the retailer when purchasing a new version. Caution! – Local legislation
may envisage serious fines in the event of abusive disposal of this product. • l The product packaging material must be
disposed of in full observance of current local legislation governing waste disposal.
EU DECLARATION OF CONFORMITY AND DECLARATION OF INCORPORATION FOR PARTLY COMPLETED MACHI-
NERY Declaration in accordance with the Directives: 2014/35/UE (LVD); 2014/30/UE (EMC); 2006/42/EC (MD)
APPENDIX II, PART B
The manufacturer ACM International S.r.l., headquarters in Via Oros 2/g, 00071, Pomezia (RM), Italy Under its sole re-
sponsibility hereby declares that: the partly completed machinery models:
• TRONIX 13 (*) • TRONIX 20 (*), TRONIX 30 (*), TRONIX 50 (*).
Description: electromechanical actuator for awnings and rolling shutters
- is intended to be installed on awnings and rolling shutters to create a machine according to the provisions of the
Directive 2006/42/EC. The machinery must not be put into service until the final machinery into which it has to be
incorporated has been declared in conformity with the provisions of the Directive 2006/42/EC (annex II-A).
- is compliant with the applicable essential safety requirements of the following Directives: Machinery Directive
2006/42/EC (annex I, chapter 1) Low Voltage Directive 2014/35/EU Electromagnetic Compatibility Directive 2014/30/
EU, Radio Directive 2014/53/EU, Directive ROHS2 2011/65/CE The relevant technical documentation is available at the
national authorities' request after justifiable request to: ACM International S.r.l., Via Oros 2/g, 00071, Pomezia (RM), Italy.
The person empowered to draw up the declaration and to provide the technical documentation:
Alfredo Lanzoni
Legal representative of ACM International S.r.l.
Pomezia, il 22/05/2019
_________________________________
(*) made in extra EU Countries on behalf of ACM International S.r.l.
E – English

PRODUCT DISPOSAL

EU DECLARATION OF CONFORMITY