ACM TRONIX Serie Instrucciones Y Advertencias Para El Instalador página 21

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

FIG.4
FIG.5
Figure 6 illustrates that whatever the type of installation (right or left), screw "A" regulates the downward movement
and screw "B" the upward movement. Move the rolling shutter (or awning) down by pressing the button. If the rolling
shutter does not reach the position required, turn screw "A" clockwise and with the button pressed down, bring the
rolling shutter down to the position required. If, instead, the rolling shutter stops below the position required move
it back up using the control button and then turn screw "A" in a anticlockwise direction to reduce the travelling di-
stance so that even if the button is pressed the rolling shutter remains stationary.At this point repeat the operations
described for the top position of the rolling shutter. Press the button to wind the rolling shutter up. If the stop position
of the rolling shutter is too low turn screw "B" clockwise until it reaches the position required. If the rolling shutter
stops in a position that is too high,turn screw "B" anticlockwise to reduce the travelling distance.
PREDISPOSITION OF THE QUICK MOUNTING BRACKET
A) Fix the wall bracket;
B) Attach the spring in the groove of the motor head;
C) Hook the motor head in the seat bracket.
CONNECTIONS
1 - BIANCO
2 - BLUE
3 - MARRONE
4 - NERO
5 - GIALLO/VERDE
ADJUSTING THE TRONIX Ø35- Ø45 LIMIT SWITCH
WINDY
CONNECTIONS
1
WHITE-Input of sensors
N
2
BLUE-Neutral
L
3
BROWN-Phase
4
BLACK-External switch
5
YELLOW/GREEN-Ground
English – E
Tabla de contenido
loading

Este manual también es adecuado para:

Tronix 13Tronix 20Tronix 30Tronix 50

Tabla de contenido