Bosch GML 20 Professional Manual Original página 24

OBJ_BUCH-1181-001.book Page 24 Monday, March 1, 2010 12:07 PM
24 | English
When small enough, the connected external au-
dio source can be fastened into the digital me-
dia bay using the Velcro strap of the holder 36.
After connecting the external audio source,
close the Media/connections flap 9 if possible,
to protect against damage and debris.
For playback of the connected audio source,
press the "Source" button 22 until the indicator
m for the desired audio source appears on the
display.
Controlling External Audio Sources
For audio sources connected via the SD/MMC
slot 34 or the USB port 33, playback can be con-
trolled via the construction site radio. The
number of the selected track is displayed at the
left of indicator d and the number of available
tracks on the right.
Play/Pause:
– To start playback, press the play/pause but-
ton 24. The playing time of the current track
is displayed in indicator j.
– To interrupt or continue the playback, press
the play/pause button 24 again. The current
playing time flashes in indicator j.
Selecting Tracks:
– To select a track, press the "– Seek" button
23 to scan down or the "Seek +" button 21 to
scan up, until the number of the desired
track is displayed on indicator d.
– To start playback, press the play/pause but-
ton 24.
Random Playback/Repeat:
– For random playback of all tracks on the card
or the USB stick, press the random playback/
repeat button 20 once. The indicator f appears
on the display.
– To repeat all tracks in the current folder/di-
rectory, press the random playback/repeat
button 20 a second time. The indicator g ap-
pears on the display.
Note: Only in this function, the number of the
current folder/directory on the card or USB
stick will appear on the right-hand side of in-
dicator d. To change the folder/directory,
you have to return to the normal playback
first and select a track from the desired
folder/directory.
1 609 929 W27 | (1.3.10)
– To repeat only the current track, press the
random playback/repeat button 20 a third
time. The indicator h appears on the display.
– To return to normal playback mode, press
the random playback/repeat button 20 a
fourth time, so that none of the indicators f,
g or h appear on the display.
– To start playback, press the play/pause but-
ton 24.
Connecting External Audio Playback
(see figure C)
The current audio signal of the construction site
radio can also be transferred to other playback
devices (e.g. amplifier and speakers).
Remove the protective cap of the "LINE OUT"
socket 30 and insert the 3.5 mm plug of a
matching AUX cable into the socket. Connect an
appropriate playback device to the AUX cable.
After removing the AUX cable, reattach the pro-
tective cap of the "LINE OUT" socket 30 to pro-
tect against dirt/debris.
Power Supply of External Devices
The power supply of external devices via the
12 V and the AC connection is possible only
when the construction site radio is connected to
mains, and not via the inserted battery.
When the construction site radio is connected
to the mains supply, this is confirmed by the lit
green control lamp 3.
USB Connection
With the USB connection, it is possible to oper-
ate and charge most devices whose power sup-
ply is possible via USB (e.g., various mobile
phones).
Disengage locking latch 8 and open the digital
media bay flap 9. Connect the USB plug of the
external device to the USB port 33 of the con-
struction site radio. To start the charging proce-
dure, the external device must possibly also be
selected as the audio source on the construc-
tion site radio.
Bosch Power Tools