Intended Use; Equipment Setup And Use; Prior To Use; Setup - AMATECH F-70403 Instrucciones De Uso

INSTRUCTIONS FOR USE

Intended use:

The Supine Top is designed to convert an open spine frame to a solid imaging
surface to position and support the patient's entire body in a variety of surgical
procedures including, but not limited to spine surgery that requires supine
positioning. These devices are intended to be used by healthcare professionals
within the Operating Room setting.
3

Equipment Setup and Use:

Prior to use:

a. Inspect the product looking for any visible damage or sharp edges that could
be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped dry
prior to each use.

Setup:

Step 1:
Place the Supine Filler Top on the Spine System.
Step 2:
Attach Supine Filler Top Pad.

Device controls and indicators:

Controls and indicators of this device are described within the Setup instructions.

Storage, Handling and Removal Instructions:

3.4.1

Storage and Handling:

The product should be stored in a clean and safe environment to prevent product
damage.
3.4.2

Removal Instruction:

Remove the Supine Filler Top Pad and then Supine Filler Top.
Document Number: 80028216
Version: A
Page 11
Issue Date: 25 MAR 2020
Ref Blank Template: 80025118 Ver. D