Technical Specifications; Ec Declaration Of Conformity; Recycling - Klein + Hummel CMS 62 T Manual Del Usuario

■ Technical Specifications

Driver Sizes and Types
Frequency Response (+/-3 dB)
Frequency Response (-10 dB)
Sensitivity of loudspeaker system with passive
crossover (halfspace)
Coverage Pattern, nominal
Directivity factor (Q)
Directivity index (DI)
Passive Crossover point, slope and type
Impedance of passive crossover
Maximum SPL
Power Handling
Cabinet Material
Cabinet Finish
Weight
Depth
Baffle cut-out
Depth
Connectors

■ EC Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant provisions of Directives
2004/ 108/ EG and 2006/ 95/ EG. The declaration is available on the internet site at www.klein-hummel.com.
Before putting the device into operation, please observe any respective country-specific regulations.

■ Recycling

Attention to product quality in the design phase ensures, firstly, that products have a long life and that, secondly,
all parts of a product may be reused or recycled at the end of that life. An extensive product servicing network
ensures that products can be repaired in the event of the premature failure of a part, or as a way to prolong the life
of a product that would otherwise be considered a candidate for landfill. Eventually there comes a time when a
product is considered beyond repair (for economic reasons or lack of parts), so the parts must be disposed of in a
suitable manner. The disposal should conform to local environmental regulations and be conducted in an
authorized recycling facility. This product consists of some or all of these components:
Item
Loudspeaker
Packing Material
User Manuals and Sales Literature
Installation Manual CMS 62 T
CMS 62 T
6.5" LF + 1" HF
85 Hz to 19 kHz
65 Hz to 22 kHz
89 dB/1W/1m
110 degrees conical
avg. 125 Hz - 16 kHz – 6.0, avg. 800 Hz - 16 kHz - 8.2
avg. 125 Hz - 16 kHz – 7.8 dB, avg. 800 Hz - 16 kHz - 9.1 dB
LF/HF: 3500Hz - 2.order
16 ohms nominal
110 dB SPL, Peak: 113 dB SPL
60 watts RMS, 120 watts program, 240 watts peak (10 ms)
Metal backside can
Black (RAL 9005) and white (RAL 9010)
3.5 kg / 7.7 lbs
320 mm / 12.6 "
285 mm /11.22"
200 mm / 7.89"
4-Pin Phoenix connector
Material
Steel, Plastic, Copper, electronic
devices
Cardboard, wood and/or plastics
Paper and cardboard
Recycling Instructions
Recycling only in authorized
recycling plants
Separate materials then recycle
Recycle
English
Klein + Hummel
10