GUIDELINES
FOR INSTALLATION
TOOLS THAT YOU MIGHT NEED
9.525 mm (3/8") drill bit
for concrete and 3 mm (1/8")
drill bit for wood
electric or manual
Pencil
WARNING
Under certain circumstances, this refrigera-
tor can be tilted forward. Personal injury
may result. Install the anti-tip bracket includ-
ed with this refrigerator.
READ USER MANUAL
Installation place:
Select the area to place your refrigerator. We
recommend a large, dry and well ventilated area.
The appliance should not be installed in such a
way that it receives direct sunlight, nor should it
be located near active heat sources such as kitch-
ens, heaters, etc...
WARNING
The door is flipped over (reversible), the anti-tip
bracket must be installed by the manufacturer or
its authorized service agent in order to avoid a
hazard.
Note: The anti-tip bracket must always be
positioned on the side opposite the door
hinge.
6
Measuring tape
11,113 mm spanner (7/16")
for concrete and
7.938 mm (5/16") for wood
MEASURE THE SPACE WHERE
1
YOU WILL LOCATE THE REFRIG-
ERATOR
Measure the width of the space where your W
refrigerator will be located. Take into account
any protrusions such as the thickness of the
base or any space that may interfere with the
cabinet.
Note: this appliance is not intended to be
used as a built-in appliance.
W
1239 mm
Model ICO19JSPRSS
1004 mm
Model IWO19JSPFSS
1111 mm
Model INO27JSPFFS
Anti-tip over
floor support
1537 mm
W
1228 mm
W
1392 mm