Safety Alert Messages-Cylinder And Processing Hazards; Figure 12 Cylinder And Processing Hazards - Milnor T6X Guía De Seguridad

Figure 12. Cylinder and Processing Hazards
2.3.2 Safety Alert Messages—Cylinder and Processing
Hazards
The following are instructions about hazards related to the cylinder and laundering process.
DANGER:
cylinder.
Do not operate the machine with a malfunctioning door interlock.
�
Know the location of all emergency stop switches, pull cords, and/or kick plates and
�
use them in an emergency to stop machine motion.
Know the location of the main machine disconnect and use it in an emergency to re-
�
move all electric power from the machine.
WARNING: Crush Hazards — Contact with the turning cylinder can crush your limbs.
Pellerin Milnor Corporation
Entangle and Sever Hazards — Contact with goods being processed can
cause the goods to wrap around your body or limbs and dismember you.
The goods are normally isolated by the locked cylinder door.
Do not attempt to open the door or reach into the cylinder until the cyl-
�
inder is stopped.
Do not touch goods inside or hanging partially outside the turning
�
The cylinder will repel any object you try to stop it with, possibly causing
the object to strike or stab you. The turning cylinder is normally isolated
by the locked cylinder door.
Do not attempt to open the door or reach into the cylinder until the cyl-
�
inder is stopped.
BNWRUS07.C03 0000234709 A.4 A.7 A.3 1/2/20 2:19 PM Released
For All Users
13