Milnor T6X Guía De Seguridad página 18

WARNING: Crush Hazards — Spaces between the press and the receiving conveyor
CAUTION: Strike and Crush Hazards — A traveling machine such as a shuttle can
Keep yourself and others clear of movement areas and paths.
�
Understand the consequences of placing a system machine on line.
�
Know the location of all emergency stop switches, pull cords, and/or kick plates and
�
use them in an emergency to stop machine motion.
Know the location of all emergency stop switches, pull cords, and/or kick plates and
�
use them in an emergency to stop machine motion. These may not stop certain devices
such as pumps on some machines.
Know the location of the main machine disconnect and use it in an emergency to re-
�
move all electric power from the machine.
CAUTION: Crush and Entrap Hazards — A traveling machine such as a shuttle can
WARNING: Fall, Entangle, and Strike Hazards — Machine motion can cause you to
15 seconds, then lock out and tag out conveyor power before allowing anyone to stand on
the scale. This ensures that the tunnel will not transfer and the loading conveyor will not
advance.
Pellerin Milnor Corporation
can close and crush or pinch your limbs. The sled extends to discharge
goods onto the receiving conveyor (COINC) and some COINCS pivot to
discharge.
Do not reach into the machine housing or frame.
�
Keep yourself and others clear of movement areas and paths.
�
strike, crush, or entrap you if you ride on it or enter its path. Traveling ma-
chines or their components can move automatically in any direction. Plac-
ing a system machine on line by energizing the machine control may
immediately summon a shuttle or other traveling machine.
Keep yourself and others off of machine.
�
crush or entrap you if the bed or bucket descends while you are under it.
The bed or bucket can descend with power off or on.
Keep yourself and others clear of movement areas and paths.
�
fall or become entangled in or struck by nearby objects if you stand, walk,
or ride on the machine. Shuttles and conveyor belts move automatically.
Keep yourself and others off of machine.
�
Keep yourself and others off of machine except to calibrate the load
�
conveyor scale. When calibrating, place the tunnel in hold and wait at least
For All Users
11