Technical Data; Noise Information; Vibration Information - Worx Sonicrafter WX673 Manual Del Usuario

TECHNICAL DATA

Type wx673 wx673.1 wx673.3 wx673.9 (6-designation of machinery,
representative of high frequency oscillation tool)
Voltage
Oscillations speed
Oscillations angle
Machine weight

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection when sound pressure is over

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
wARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
How the tool is used and the materials being drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
wARNING: To be accurate, an estimation of exposure level in the actual conditions of
use should also take account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Helping to minimize your vibration exposure risk.
High frequency multi-function tool
Vibration emission value a
Uncertainty K = 1.5m/s²
12V
5000-20000/min
3.2°
1.0kg
L : 75dB(A)
pA
L : 86dB(A)
wA
3.0dB(A)
80dB(A)
=3.14m/s
2
h
EN
7