Sears Kenmore 796.8138 Manual De Uso Y Cuidado página 18

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

WARNING:
To reduce the risk of fire, electric shock, or injury to persons, read this entire
manual, including the Important Safety Instructions, before operating this dryer.
CONTROL
PANEL FEATURES
_hKenmore
Connect
d
Steam
Casual
Delicates
,WER
HI
STARTIPAUSE
\
/
\
/
i
Temp
[
!ii
!iii!
]
[ Timed DI;]
[
!!!m i
I
O
POWER (ON/OFF)
BUTTON
Press to turn the dryer ON or OFF. Pressing the
POWER button during a cycle will cancel that cycle
and any settings will be lost.
O
CYCLE SELECTOR KNOB
The cycle selector knob is used to select the desired
dry cycle by rotating the knob in either direction until
the desired cycle LED is illuminated. Once the desired
cycle has been selected, the standard presets for that
cycle will show in the display. These settings can be
adjusted using the cycle modifier or option buttons
any time before starting the cycle.
_I
START/PAUSE BUTTON
Press this button to start the selected cycle. The
dryer will display the estimated
time (AUTO DRY) or
set time (TIMED DRY) remaining
and start tumbling.
To pause the cycle at any time, open the dryer door
or press START/PAUSE. To resume the cycle where it
was stopped,
press START/PAUSE again.
NOTE: If the dryer has been stopped for more than
four minutes, the dryer will turn off automatically.
O
OPTION
BUTTONS
These buttons allow you to select cycle options.
Some of the option buttons have secondary
functions.
The controls can be locked or unlocked by
pressing and holding the CONTROL
LOCI( button
for five seconds.
O
O
O
O
CYCLE MODIFIER
BUTTONS
Use these buttons to adjust the settings for the
selected cycle. The settings light up above the
buttons to show the current selection. The default
temperature
setting cannot be changed in AUTO
DRY cycles. AUTO DRY cycles are modified
using
the DRY LEVEL button.
TIME AND STATUS DISPLAY
The display shows the estimated
time remaining
for
auto cycles and actual time for timed cycles. The
status of the cycle is also displayed.
The CHECK
VENT indicator
will illuminate
if there is a serious
restriction
in the exhaust system.
STEAM FUNCTIONS
The STEAM REFRESH cycle uses a swirling jet of
steam to refresh clothes. The STATIC SHIELD and
IRON READY options are also available
for most
cycles.
STEAM FEEDER
This drawer
contains the reservoir for the water used
by the dryer to create the steam used for the steam
cycle and options.
Fill the steam feeder with tap
water to take advantage
of the power of steam for
fresher, static-free
fabrics.
NOTE: To protect your fabrics, not all settings are allowed
in all cycles.
18
Tabla de contenido
loading

Este manual también es adecuado para:

Kenmore 796.9138

Tabla de contenido