Tabla de contenido
Idiomas disponibles
Idiomas disponibles
• Check the pulse oximeter sensor application site frequently to determine the positioning
of the sensor and circulation and skin sensitivity of the user.
• Before use, carefully read the manual.
• The 18710 has no SpO
• Prolonged use or the user's condition may require changing the sensor site
periodically. Change sensor site and check skin integrity, circulatory status, and correct
alignment at least every 4 hours.
3.Inaccurate measurements may be caused by
• Do not sterilize the device using autoclaving, ethylene oxide sterilizing, or immersing
the sensors in liquid which may cause inaccurate readings. The device is not intended
for sterilization.
• Significant levels of dysfunctional hemoglobin's (such as carboxy- hemoglobin or met
hemoglobin)
• Intravascular dyes such as indocyanine green or methylene blue
• SpO 2 measurements may be adversely affected in the presence of high ambient light.
Shield the sensor area from direct sunlight or indoor lighting.
• Excessive user movement
• High-frequency electrosurgical interference and defibrillators
alarms, it is not for continuous monitoring, as indicated by the symbol.
2
- 02 -
Tabla de contenido
