Rotary Hammer - GRAPHITE 58G529 Manual Del Usuario

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
PRECAUTIONS FOR USING ROTARY HAMMER
Caution:
Unplug the power cord from mains socket before commencing any activities related to adjustment,
repair or maintenance (e.g. drill replacement).
•
Use hearing protection measures during work. Exposure to noise may cause hearing loss.
•
Use the power tool with additional handles supplied with the power tool. Loss of control may cause
operator injury.
•
Whenever tool can hit hidden electric wires during operation, hold the power tool only by insula-
ted handles. Contact with electric wire may transfer voltage to metal parts of the power tool and cause
electric shock.
•
Use proper equipment to locate hidden power lines. Contact with live wires may cause fire or electric
shock. Damage of gas installation pipe may cause explosion. Ingress to water line may cause electric
shock and cause major property damage.
•
Each time before connecting the power tool check the power cord, in case of damage hand over to
authorized workshop for replacement.
•
When operating the power tool hold it in both hands while keeping stable body position. Keep the
handles clean. Power tool is safer when held with two hands.
•
When operating the power tool held high, stand firmly on the ground and ensure there are no
bystanders below.
•
Avoid touching rotating parts. Touching of rotating power tool parts, equipment in particular, may
cause body injury.
•
Wait until power tools comes to a complete stop before putting it away. Working tool may jam and
cause loss of control over the power tool.
•
Do not direct operating power tool at other persons or at yourself.
•
Use anti dust mask during operation to protect respiratory system.
CAUTION: This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used, ne-
vertheless there is always a small risk of injuries at work.
Explanation of used symbols
1 2
1. Read instruction manual, observe warnings and safety conditions therein.
2. Device with class II insulation.
3. Use personal protection measures (protective goggles, earmuff protectors, anti-dust mask)
4. Disconnect the power cord before starting maintenance or operation.
5. Protect against rain.
6. Keep the tool away from children.

ROTARY HAMMER

58G529
DETAILED SAFETY REGULATIONS
3 4 5
14
6