Electrical Specifications - Bruker AXS S4 EXPLORER Guía De Preinstalación

Introduction

Electrical Specifications

Tab. 2-2: Technical Specifications: Electrical Specifications
X-ray Generator and Control Electronics
Mains Supply Voltage
(Actual nominal voltage is factory-preset and
printed on the system label located at the rear
side of the spectrometer system.)
Frequency Range
Maximum Power Consumption
Overvoltage Category according IEC 664
Spectrometry Components
Tab. 2-3: Technical Specifications: Spectrometry Components
X-ray Tube
X-ray tube
Nominal high voltage
Nominal current
Nominal power
Anode material
2-22
One Phase Supply: (on request only)
208 VAC (min.200 V / +10 %), 60 Hz
230 VAC (+/- 10 %)
240 VAC (+ 6 % / - 10 %)
Three Phases Supply:
3 x 120 VAC (+/- 10 %)
3 x 230 VAC (+/- 10 %)
3 x 240 VAC (+6 % / - 10 %)
47Hz - 63Hz
max. 4 kVA (3-phases mains supply)
max. 3.6 kVA (1-phase mains supply)
II
Max. 50 kVDC
Max. 50 mADC
Max. 1000 W
Rhodium
S4 EXPLORER X-ray Spectrometer
DOC-M80-ZXX004 V6 – 03.2007