Tabla de contenido
Idiomas disponibles
Idiomas disponibles
COMPRESSED AIR SUPPLY
Clean air and correct pressure in the compressed air system is essential for the supply of this tool.
The maximum pressure for this tool is 6.3 bar and is recommended for most compressed air tools of
this class. Values such as the working pressure and other data can be obtained from the section
Technical Data. An increase of the pressure is necessary if the length of the air hose or other
circumstances lead to a reduction of the pressure. In this case, it may be necessary to increase the
pressure from 6.2 to, for example 7.2 bar, in order to guarantee a pressure of 6.3 bar on the tool.
Water in the hose and compressor leads to reduced efficiency and damage to the air tool. Drain the
compressed air system before each use. Use a pressure regulator with pressure gauge if the
pressure in the compressed air system is too high.
RECOMMENDED COMPRESSED AIR SYSTEM
No.
1
Air tool
2
Air hose
3
Quick coupling
4
Oiler
5
Pressure reducer
OPERATION
• Operate the product exclusively on compressed air systems that have a correct air pressure and
sufficient air volume (l/min) for this tool.
• Before using the compressed air device, add 4 to 5 drops of air tool oil to the air inlet. The output of
the device depends on the size of the air compressor and the compressed air supply volume.
• The speed can take place via a air supply regulator (not included in the scope of supply).
• The technical data of the tool relates to a working pressure of 6.3 bar.
• Always take great care when using the air cutter. In event of negligent operation, components
inside the device may be damaged and restrict performance.
• To operate the tool, press the operating lever (trigger).
• To stop the tool, let go of the operating lever.
• Never remove any information labels. Replace damaged labels.
• Keep hands, loose clothing and long hair away from moving parts of the tool.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Designation
Tel.: 02196 720480
Fax.: 02196 7204820
No.
Designation
6
Drainage/filtering unit
7
Drainage valve
8
Shut-off valve
9
Dryer/filter unit
10
Compressor / 11 Drainage valve
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
