Andersen 400 Serie Guia De Instalacion página 2

Metal fasteners and other hardware components may corrode when exposed to preservative treated and fire-
retardant treated lumber. Obtain and use the appropriate metal fasteners and hardware as called out by the
installation guide to fasten unit to any rough opening made from pressure treated and fire-retardant treated
lumber. Failure to use the appropriate materials for the installation may cause a failure resulting in injury,
property or product damage.
Accessories such as grilles, art glass, and insect screens may dislodge and become airborne if window/door is
impacted by wind borne debris from severe storms or hurricane strength winds. In the event of a storm, remove
all accessories from windows/doors and move to a safe location. DO NOT stand in front of or near windows/
doors.
• Units must be installed per installation instructions using Jamb Clips or the product will not meet designated
performance levels.
• Venting units are packaged with temporary operator/lock handles. Permanent operator/lock hardware is
available in various styles and finishes from your local Andersen dealer.
• DO NOT apply Extension Jambs prior to unit installation.
Parts Included
(1) Installation Guide
(1) Installation Pack
(Installation Clips and Screws)
Options and Accessories
• Extension Jambs
• Grilles
(Interior and Exterior)
Art Glass Panels
• Andersen ®
• Glazing Panels
• Auxiliary Casings
• Joining Kits
Venting Accessories
• Hardware Style Packs
• Insect Screens
• Operator Stud Covers
Additional Parts Sold Separately
• Drip Cap
(full width)
Tools & Supplies
• Safety Glasses
• Tape Measure
• Hammer
• Level
• Shims
(waterproof)
• Utility Knife
• Caulk Gun
• 1-3/4" Roofing Nails
• 1-1/2" (4d) Finish Nails
• Drill/Driver
• Phillips Bit
• #8 x 1-1/2" Screws
• Sealant
2
Installation Guide
Exterior View