Andersen 400 Serie Guia De Instalacion página 10

Finishing, Cleaning, and Maintenance Instructions
• DO NOT expose unfinished wood to high moisture
conditions, excessive heat or humidity. Finish
interior wood surfaces immediately after
installation. Unfinished wood surfaces will
discolor, deteriorate, and/or may bow and split.
• DO NOT stain or paint weatherstrip, silicone beads,
vinyl, glass, or hardware. Damage to product may
occur and unit operation may be impaired.
• Acid solutions used to wash masonry/concrete will
damage glass, fasteners, hardware, and metal
flashing. If these solutions are used, follow the
acid solution manufacturer's instructions carefully.
Protect and/or cover Andersen products during the
cleaning process to prevent acid contact. If acid
does come in contact with unit, immediately wash
all surfaces with clean water.
INTERIOR FINISHING
Read and follow finishing manufacturer's instructions
and warnings on each container of finish material for
priming, painting, staining, and varnishing.
CLEANING
Clean exterior frame, sash members, and insect
screens using a mild detergent-and-water solution and
a soft cloth or brush. DO NOT use abrasive cleaners or
solutions containing corrosive solvents. For persistent
dirt or grime, use a nonabrasive cleanser or a mixture
of water and alcohol or ammonia.
MAINTENANCE
Immediately sand and refinish any interior wood that
becomes stained or mildewed to prevent further
discoloration and/or damage. For further information,
contact your local Andersen
found in the Yellow Pages under Windows.
dealer. Dealers can be
10
Installation Guide